Surface rust removal

1966 Chrysler valiant the out side edge, then a drill to dig out the pitted oxides, then bear metal treatment with the best quality rust converters and protective paints.

Restolad
videos are for reference and entertainment only Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment, follow manufacturers instructions & MSDS

Duration : 0:5:53

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


Panel replacement / spot weld removal

Resharpening a drill bit angle, to make drilling out spot welds easer
and leave material on the inner panels . that you can weld too.
this will also help hide the fact, a panel has been replaced
when you look from behind or underneath.
Restolad Disclaimer
videos are for reference and entertainment only Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment, follow manufacturers instructions & MSDS

Duration : 0:4:21

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


lesson on welding thin steel,

Demonstrating the use of alloyed steels,as a heat sink, to prevent distortion and burning thru,
when welding panel steel or thin materials.

Disclaimer
Videos are for reference and entertainment only: Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment,

Duration : 0:4:43

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


Kent Industrial Machinery 20″ X 40″ Precision Surface Grinder New in 1995

MODEL: KGS 510 AHD NEW: 1995
Request a full price Quotation leads@wigglesworth.com
ELECTRO-MAGNETIC CHUCK SIZE……………… 20″ X 40″
TABLE LONGITUDINAL TRAVEL……………….. 44 1/2″
CROSS TRAVEL…………………………… 21 5/8″
T-SLOTS……………………………….. 3″ X 5/8″
MAX. DISTANCE CENTER OF SPINDLE TO TABLE….. 23″
TABLE SPEED……………………………. 13 – 75 FPM
VERTICAL FEED GRADUATION………………… 0.0001″
GRINDING WHEEL SIZE…………………….. 14″ X 1 1/2″ X 5″
SPINDLE MOTOR (V-3 GRADE)……………….. 5 HP
HYDRAULIC MOTOR………………………… 3 HP
DOWNFEED INCREMENT (VARIABLE 6 STEPS)…….. 0.0002″ – 0.0016″
WHEEL SPINDLE SPEED…………………….. 1740 RPM
APPROX. WEIGHT…………………………. 11015 LBS

FEATURES AND EQUIPMENT:

20″ X 40″ KANETSU ELECTROMAGNETIC CHUCK+
3-AXIS AUTOMATIC MOVEMENT
RAPID ELEVATION OF GRINDING HEAD
HYDRAULIC TABLE AND ELECTRONIC CROSSFEED
AUTOMATIC INCREMENTAL DOWNFEED
COLUMN FEED DESIGN
TEFLON COATED PRECISION FLAT AND “V” WAYS
AUTOMATIC LUBRICATION SYSTEM
PARALLEL DRESSER
MAGNETIC SEPERATOR & COOLANT SYSTEM
PRECISION “V” AND FLAT TEFLON WAYS
WHEEL BALANCING BASE
WHEEL BALANCING ARBOR
GRINDING WHEEL
WHEEL FLANGE
DIAMOND DRESSER
ALL AVAILABLE BOOKS & MANUALS

SPECIFICATIONS SUBJECT TO VERIFICATION

Currently Receiving a Ful Cosmetic Make Over

Duration : 0:5:17

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , ,


How to change bearings and brakes on suzuki z400 atv

You need no Special Tools to do this easy job.

Duration : 0:15:0

Continue reading

Technorati Tags: , , , , , , , , , ,


Remove flywheel/stator without special tools.

In this video I show how to remove the flywheel from a 1982 XR200R without using any Special Tools. I learned this trick from watching a video an lawnmowers from the davidsfarm youtube channel.

For an alternative method, you can also use the rear axle bolt to fit into the larger thread instead of the smaller M12, and then hit it in the opposite direction without the screwdriver. In this case though, it did not fit. I know this works for some XRs, but not mine.

Duration : 0:1:58

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,