Surface rust removal

1966 Chrysler valiant the out side edge, then a drill to dig out the pitted oxides, then bear metal treatment with the best quality rust converters and protective paints.

Restolad
videos are for reference and entertainment only Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment, follow manufacturers instructions & MSDS

Duration : 0:5:53

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


Panel replacement / spot weld removal

Resharpening a drill bit angle, to make drilling out spot welds easer
and leave material on the inner panels . that you can weld too.
this will also help hide the fact, a panel has been replaced
when you look from behind or underneath.
Restolad Disclaimer
videos are for reference and entertainment only Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment, follow manufacturers instructions & MSDS

Duration : 0:4:21

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


lesson on welding thin steel,

Demonstrating the use of alloyed steels,as a heat sink, to prevent distortion and burning thru,
when welding panel steel or thin materials.

Disclaimer
Videos are for reference and entertainment only: Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment,

Duration : 0:4:43

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


Safety Tools Allmet Training 2 Paint Removal Disk Remove and Attach

Safety Tools Allmet Certified Ex Cold Work Tools ATEX EX Cold Grinding Sub-Sea, Subsea, Off Shore, Off-Shore Ex Tools, Cutting Tools, Grinding Tools, No Hot Work Permits

Duration : 0:2:38

Continue reading

Technorati Tags: , , , , , , , ,


Stator Repair – 3e of 9 – Accessing Clutch Plates with Special Tool.AVI

This is one of several short videos demonstrating use of the special tool to removal and install new clutch disc plate on our 1995 Harley Davidson Heritage Softail Classic. Here we demonstrate how to use the special tool to disassemble the clutch assembly.

Duration : 0:7:15

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , ,


How To Remove A Land Rover Fan and Viscous Clutch Without Any Special Tools

Just figured I’d take a quick video of removing the fan/viscous clutch on my 2000 Land Rover Discovery series 2 using a tip given to me by a friend of mine Luke who is a LR master tech and has his own shop here in Louisville, KY. I’ve seen plenty of different ways on the Land Rover internet forums that involve using strap wrenches on the water pump pulley or renting or buying special fan clutch tools and had never seen anyone doing it this way. So I figured I’d share since it is so quick and easy. Hope this helps someone.

Duration : 0:3:15

Continue reading

Technorati Tags: , , , , , , , , ,


Remove flywheel/stator without special tools.

In this video I show how to remove the flywheel from a 1982 XR200R without using any Special Tools. I learned this trick from watching a video an lawnmowers from the davidsfarm youtube channel.

For an alternative method, you can also use the rear axle bolt to fit into the larger thread instead of the smaller M12, and then hit it in the opposite direction without the screwdriver. In this case though, it did not fit. I know this works for some XRs, but not mine.

Duration : 0:1:58

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,