Surface rust removal

1966 Chrysler valiant the out side edge, then a drill to dig out the pitted oxides, then bear metal treatment with the best quality rust converters and protective paints.

Restolad
videos are for reference and entertainment only Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment, follow manufacturers instructions & MSDS

Duration : 0:5:53

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


wood shaving machine home built

I made this machine from a standard planer. This is the first step in avoiding the very high prices asked for the industrial machines available on the market. Total cost about R13000 including a planing machine bought new.

I hope to go bigger and better from here on.

Duration : 0:0:57

Continue reading

Technorati Tags: , , , ,


Panel replacement / spot weld removal

Resharpening a drill bit angle, to make drilling out spot welds easer
and leave material on the inner panels . that you can weld too.
this will also help hide the fact, a panel has been replaced
when you look from behind or underneath.
Restolad Disclaimer
videos are for reference and entertainment only Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment, follow manufacturers instructions & MSDS

Duration : 0:4:21

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


lesson on welding thin steel,

Demonstrating the use of alloyed steels,as a heat sink, to prevent distortion and burning thru,
when welding panel steel or thin materials.

Disclaimer
Videos are for reference and entertainment only: Even tho they are based on step by step guide – If you attempt a repair like the one seen in this video please use the proper safety equipment,

Duration : 0:4:43

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,


POWER TOOL SPECIAL FEATURES

BOB SCHMIDT SHOWS YOU A FEATURE YOU WILL WANT TO HAVE IN A NEW POWER TOOL . WHEN BUYING TOOLS FOR HOME MAINTENANCE AND HOME REMODELING PROJECTS

Duration : 0:3:58

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , ,


How to service ( lubricate ) a bicycle derailleur cable. ( No Tools ) adjust cables

One of the main causes of poor shifting performance in a bike that had formerly shifted pretty well is excess dust, dirt, and contaminant in the derailleur housing.

This video demonstrates a technique on how to lubricate a bicycle derailleur cable without having to use any Special Tools. The trick is basically that you run the gears up to the point that the derailleur is at it’s maximum extension under tension (on the biggest cog for standard, or down on the smaller cogs for a reverse, or “Rapid Rise” derailleur) and then, without pedaling, you release the shifter to the other end of the spectrum. By leaving the derailleur at it’s full extension, but releasing the shifter you create a bunch of slack in the cable (because the chain on the cogs holds the derailleur in place at full extension. With the cable slacked out you can remove the derailleur housing and cable from it’s guides (if the guides are slotted which is the standard on most decent bikes.) Then with the cable housing able to slide up and down on the cable itself, you can lubricate the cable, inspect for kinks, and clean.

The best part of this technique is that you can do it quickly, you can do it anywhere, and it does not mess with the derailleur adjustment at all.

Duration : 0:11:20

Continue reading

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,