Is there a special tool to install a window crank on a 1971 Chevelle?

We have the window crank and the clips but how do you put them on? Is there a special tool?

yes there is, it is about 5 – 10 dollars at any auto parts store. it is a flat piece of metal with a notch to push out the clip. that is to remove, to put on, put the clip on the crank and push it on the pin.


3 Responses to Is there a special tool to install a window crank on a 1971 Chevelle?

  1. yes there is, it is about 5 – 10 dollars at any auto parts store. it is a flat piece of metal with a notch to push out the clip. that is to remove, to put on, put the clip on the crank and push it on the pin.
    References :

  2. Put the clip on the crank arm first, then just push it on the shaft. The shaft is beveled on the end so it will spread the clip when you push the crank arm on. Also, if you’re a big dude, roll the window all the way up or down (wichever position you will have it in the most) with pliers before you put the arm on and then point the arm up and a little bit back when you install it so it doesn’t interfere with your knee while you drive.
    References :
    cars are my life, man.

  3. No install the clip onto the handle and put the handle onto the regulator and give it a sharp smack with palm of your hand
    References :

Leave a Reply

Your email address will not be published. Required fields are marked *