Any special tools needed when replacing a Universal Joint in 96 Chevy Blazer?

I have to replace the U-joint in my 96 Blazer. Ive never done it before and was wondering if i need a tool specifically for universal joints. Thank you.

you will need a torch to melt out the factory glue. you will notice a hard white glue on the sides. you heat the yolk up the glue flows out, then they fall out. the new ones come with keepers.

How To Make More Money With Information Products Than Ever Before By Using No Cost Powerful Tools

It’s all under your control.

If you sell information products and want to make more money with them, there’s good news:

It’s all under your control.

That’s right, you can make more money with your information products simply by doing something that you have the power to do.

It’s not dependent upon anyone else. It’s up to you.

Let me explain …

While there are a lot of different aspects of selling information products, there are really only two ways to make more money with them …

Sell More
Refund Less

Really, it’s pretty much that simple.

In order to make more money with information products you need to either SELL MORE or REFUND LESS.

Or, better still, do BOTH.

Now, in the many years I’ve been selling information products, I’ve found there are three powerful tools that will help you do just that.

You can use these three tools to SELL MORE by using them on your classified ads, solo mailings, sales letters, auto-responder messages and virtually any sales tool.

You can also use these three tools to REFUND LESS by applying them to the information products you create.

Care to find out what they are?

Read on …

*** Three Powerful Tools ***
What makes these tools so powerful is a combination of important benefits

* They don’t cost a penny to use.
* They work over and over again.
* They are under your control.

In fact, you already have them.

These three powerful tools are WAYS TO USE WORDS.

Tool #1. Education. When it comes to information products, nothing comes close to the power and profitability of educating your readers.

I’m talking the distance between the planet Pluto and the computer screen you’re now staring at.

Not even remotely close.

Content is king. Nobody else gets to wear the crown or sit on the throne. Content rules the land of information products.

So, first things first, you gotta give your readers information that educates them. You gotta teach them something.

Do this in your promotion tools (ezine articles, reports, sales letters, etc.) and you’ll have readers thinking “This person knows something … I better take a closer look.”


Educate customers in your information products and show them how to produce results in their own lives and you’ll make them happy, satisfied customers.


Tool #2. Entertainment. To be completely honest, it’s not enough to solely provide content. Even if it’s good content, that won’t always get the job done.

Think of it this way: your high school civics teacher provided you with (too much) content in a single 55-minute class, but would you really buy anything from him?

Maybe a hall pass or a set of earplugs, but that’s about it. :o)

Nobody likes to read BORING content. We turn off boring television programs, we fall asleep reading boring books and we keep our credit cards tucked firmly inside our pockets when we read boring sales letters, ezine articles, solo mailings or special reports.

Make it fun. Make it entertaining. And you can do that by using …

* Illustrations
* Funny stories
* Analogies
* Outrageous statements

I once wrote an article entitled “I’ll Swallow A Live Grasshopper If This Doesn’t Boost Your Website Traffic”.

Do you think anyone read it?

Ask yourself this: Would YOU like to read it?

We love to have a good time, and there’s no reason why you shouldn’t apply that reasoning to your writing.

Keep readers interested as they consume your promotion materials by entertaining them.


Help customers enjoy reading page after page of your product by entertaining them.


When you add entertainment to education, you’ll make more money with information products …

… faster than you can say ” “LIVE GRASSHOPPER.” :o)

Tool #3. Emotion. Whether it’s outrage over an injustice, excitement over a success or piqued interest over a possibility, our emotions drive us.

Few decisions are based on intelligent analysis, but rather on emotional response. Few actions are based on accurate data, but rather on impulsive feelings.

We are emotional people. And there is no stronger proof of that than to watch what we do and to listen to what we say.

Your job is to get us emotional. Fill us with hope. Empower us. Give us courage. Motivate us. Issue a challenge. Inspire. Get us to do something.

That’s what we really want. More than education, more than entertainment – we want someone to compel us to do something to make our lives better.

And the power and profits go to the ones who can do that.

Fill readers with hope and expectation with your marketing materials.


Give your customers confidence and enthusiasm as they read chapter after chapter of your information product.


*** Conclusion ***

If you want to make more money with information products, then you CAN do it. You’re in charge. It’s under your control.


Three powerful tools that lead to incredible profits.

But, only if you use them.

Some will read this article and discard it like they have done with countless others.

And some will get busy.

I think you’ll be one of the few who will make more money.

Prove me right.

Jimmy D. Brown

How To Use Hand Tools Safely

You know Uncle Will: the poster boy for Yankee Ingenuity. He’s the guy who can solve any household problem with little more than a hammer and screwdriver.

One day Will used a screwdriver instead of a pry bar to rip boards off an old deck. When the screwdriver snapped under the strain, he fell and broke his two front teeth. That’s genius?

There is a right way and a wrong way to use hand tools, but a lot of people don’t seem to know it. In fact, according to the U.S. Consumer Product Safety Commission, each year more than 100,000 injuries require hospital treatment due to misuse of hand tools.

First Steps To A Quality Job

* Buy the best tool you can afford. Cheap tools are more likely to break, and more difficult to use. Buy several versions or sizes of the same tool to assure you have the right tool for the right job.

* Use a hand tool for the job it was manufactured to perform.

* Inspect tools for cracks, chips, mushrooming, and wear. Discard damaged tools promptly.

* Be sure handles are fixed firmly into a tool’s working end.

* Plan your job before you start.

* Check for hidden hazards, e.g., electric wires in a wall.

* Shut the current off when working near electricity.

* Organize the tools in a toolbox.

* Position your body securely while working with the tool. Wear eye protection.

* Concentrate! No matter how trivial the task seems.

Striking And Struck Tools

* Wear safety goggles any time you’re using one of these tools.

* A hammer head should be at least 3/8″ larger in diameter than the striking surface of a chisel, punch, wedge or other struck tools.

* Strike a hammer with the face parallel to the surface being struck. Glancing, off-center blows can throw dangerous splinters into the air.

* Use the right hammer for the job.

* Do not use one hammer to strike another hammer or a hatchet.

* Never use a striking tool with a loose or damaged handle.

* Pull nails or pry wood away from your face.

* Sharpen struck tools before use. Aim the blow or cut away from your body.


* The blade tip should fit a slotted screw, without hanging over.

* For many jobs, you’ll need to drill a hole first.

* Do not strike a screwdriver handle with a hammer. It could splinter and shatter.

* Never use the handle as a striking tool.

* Do not use them as pry bars, scrapers, lid removers, punches or chisels.

* Don’t hold work in one hand while using a screwdriver in the other. If the blade slips, you could get hurt.

* Screws are designed to be driven with the proper type of screwdriver. If you fail to take the time to match the screw with the screwdriver, the tool’s blade can slip out of the screw’s slot, resulting in an injury.

* Use insulated screwdrivers when working around electricity, but also turn off the power.


* For better control, pull the wrench toward you; don’t push it away from you. On high-torque jobs, stand firmly.

* Replace wrenches when the teeth become marred or worn.

* Do not substitute pliers for work a wrench should do.

* Never hammer with a wrench.

* Never put your face or head level with a wrench handle.

* Never use a handle extender while turning a wrench. Switch to a wrench with a longer handle or one designed to withstand more force. Homemade handle extenders can slip off and break.

* Use a box or socket wrench to free a tight or frozen nut.

* Make sure the wrench fits a nut or bolt exactly. Limit your use of adjustable wrenches.

Cordless Tools

* Read and thoroughly understand the instruction manual.

* Do not operate cordless tools in or near flammable liquids, or in explosive atmospheres.

* Keep the tool and the recharging unit in an area not accessible to children.

* Remove batteries or lock the switch in its “OFF” position before changing accessories, adjusting or cleaning the tool.

* When cutting, drilling or driving into walls, floors, or wherever live electrical wires may be encountered, hold the tool only by the insulated gripping surfaces.

* Do not touch the drill bit, blade or cutter immediately after operation. It may be extremely hot.

John Myre

Minecraft LP Episode 2 – Special Tools of Industrial Craft 2 (Andrakon)

My second and more comical episode of Industrial craft 2. I cover several tools (Wrench, Electric wrench, RE-battery, Mining drill, Diamond drill, Chainsaw, BatPack), an energy storage device (Batbox), and two power generators (solar panel, wind turbine). I also nearly get blown away and actually do get my face chewed off, YAY. XD

Industrial Craft 2 1.23

Industrial Craft Wiki


Duration : 0:38:20

Continue reading

Online Safety Tools from Norton

As part of the Ultimate Black Belt Test, Studio 13 by MBS Works to assist our fellow martial arts instructors on ways to protect our students. Instructor Nick Kelly goes over a suite of online resources available from Symantec for online users to stay safe. Check out the short video on free online safety resources available from

Duration : 0:1:22

Continue reading

Expand Your Career Possibilities With An Information Technology Degree

As larger numbers of businesses come to rely on computer networks as their primary means of communication, an information technology degree becomes more lucrative. The demand for professionals with these skills is growing on a daily basis. As you begin to think about where you would like to be professionally, take some time to consider a degree that will place you in high demand throughout a wide range of industries. Companies of every size and structure will be clamoring for your services.

One setting where you could put your information technology degree to work would be in a professional office setting. There are several ways that you could find your degree useful in such an environment. Obviously, when an entire office is linked by a network, that network will require maintenance. You may also find yourself doing some training, as not every employee who is using the network will have such a full understanding of its capabilities. You may also have the opportunity to suggest upgrades and make sure that the information within the office is being managed and acquired with maximum efficiency.

You may also find that an information technology degree is quite useful in an industrial setting. Many factories use an intricate network to monitor everything from the performance of automated machinery to the temperature in the building. There are an endless number of possibilities which could utilize your skills and place you in high demand.

Perhaps one of the most lucrative facets of a degree in information technology is the possibility of self employment. There are several different ways that you could develop this. As a professional, companies will look to you to build networking solutions for them. They will look see you as the expert and will be willing to pay you to not only tell them what they need, but to provide it, and then maintain it. If you enjoy customer service, being your own boss, as well as the information technology field, then this may be a great road for you to consider.

Another path that you might take a look at is as a consultant. There are a large number of companies who already have information technology solutions in place, but are looking for an improvement in services. In some instances they realize that the systems, which they are currently using, are outdated and need to be upgraded or completely replaced. There is a large demand for information technology professionals who are willing to come in and give an honest assessment of a company’s needs. They will look to you to make recommendations and to help them develop a plan to improve their information efficiency and capacity.

An information technology degree can open doors for you in places where you might not even know they exist. This is a career field that is going to continue to get bigger and growth potential doesn’t seem to end. People who have an understanding of the computer systems that manage our business, our finances, and our everyday lives will continue to be in demand and will be able to carve their own way in a world that is coming to rely very heavily on their skills and knowledge.

Andy West

GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends

GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends
Product DescriptionConstructed of heavy-duty, reinforced rubber for durability, the Goodyear Safety Yellow Rubber Hose provides industrial-level performance in all temperatures. Ideal for a wide range of home and jobsite applications, this heavy-duty hose is designed to stand up to the demands of your job and comes with male brass ferrules and barbed fittings.

.caption {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;font-weight: bold;font-style: italic;}ul.indent {list-style: inside disc;text-indent: 20px;}table.callout {font-family: Verdana, Helvetica, Arial, serif;margin: 10px;width: 250;}td.callout3-c26 {height: 100 percent;background: url(‘’) repeat-y;border-left: 0px solid #999999;border-right: 1px solid #999999;padding: 10px;width: 250px;}ul.callout {list-style: inside disc;text-indent: -12px;font-size: 12px;line-height: 1.5em;}h5.callout {text-align: center;}img.withlink {border:1px black solid;}a.nodecoration {text-decoration: none}

The Goodyear Safety Yellow Rubber Hose offers:
  • An oil- and abrasion-resistant tube and cover
  • Dual-braided, 4-spiral reinforced construction
  • Vinyl guards at both ends
  • 1/4″ x 1/4″ male ends
  • 300 PSI working pressure, 1,200 PSI burst pressure
  • Made in the USA

Designed for use with air tools and accessories, this dependable, industrial hose measures 3/8-inch by 50-feet. View larger.

High-Quality Rubber Construction for Optimum Dependability
Whether you’re a do-it-yourselfer or a professional contractor, this industrial air hose is sure to deliver long-lasting dependability. Made of high-quality rubber that keeps its shape in extreme heat or cold, this oil-resistant hose boasts dual-braided, four-spiral, reinforced construction for exceptional durability.

Oil- and Abrasion-Resistant Tube Guards Against Wear and Tear
Featuring an oil- and abrasion-resistant tube, the Goodyear Safety Yellow Rubber Hose can be used on cluttered or dirty jobsites without you having to worry about rips, tears, and other damage. For additional peace of mind, the vinyl guides at the 1/4-inch by 1/4-inch ends maintain an effective barrier against wear.

Measurement and PSI Information
This hose measures 3/8-inch by 50 feet, providing plenty of length for your job. It’s rated at 250 PSI (300 PSI working pressure, 1,200 PSI burst pressure) and is manufactured exclusively in the USA.

About Goodyear: A Trusted American Brand
The number one tire maker in North and Latin America, Goodyear is a trusted brand in rubber goods. Founded in 1898 as the Goodyear Tire and Rubber Company by Frank Seiberling, who was inspired by the sudden emergence of the horseless carriage, Goodyear is currently one of the world’s largest tire companies, operating in most regions of the world. For the better part of a century, Goodyear’s corporate values have been centered on the phrase “Protect Our Good Name,” which means you’ll see the Goodyear’s winged-foot logo only on high-quality products.

What’s in the Box
Hose, male brass ferrules, and barbed fittings.

Continue reading

Northern Industrial Machinery Skate – 3300-Lb. Capacity

Northern Industrial Machinery Skate - 3300-Lb. Capacity
Product DescriptionThe Northern Industrial Machinery skate is designed to move heavy equipment and machinery. Load Capacity (lbs.): 3,300, Hydraulic: No, Rollers (qty.): 4, Roller Size (in.): 2 1/2 x 5/8, Base L x W (in.): 8 x 7 1/4, Length (in.): 8, Dimensions L x W x H (in.): 8 x 7 x 3, Single, Pair, or Set: Single, Includes: Steel wheels

Continue reading